Owners Manual

Monitoring Network Availability | Performance Monitoring
OMNM 6.5.2 User Guide 409
Juniper CoS
This (optional) monitor uses the fields described below and lets you track CoS attributes for
Juniper equipment. It appears only on systems with a Juniper device driver installed.
Monitor Entities
Click Add to configure monitored devices in a subsequent selector screen. This is the typical
selector with a filter to help you find discovered devices.
At the right you can see
PF (Port Filter) and IF (Interface Filter) columns, which display green
icons if such filters are active. Click the
Configure Port/Interface Filter icon at the far right to
configure such filters. These contain the standard filtering mechanism visible throughout
OpenManage Network Manager. (See
Defining Advanced Filters on page 147, for example).
Notice that for port and interface filters, the editor also lets you delete the filter. The
Delete button
on the right of listed Monitor Entities lets you delete equipment.
COS Properties
Click to select Available Attributes , and use the arrows between columns to move these to the
Selected Attributes column to select the monitored CoS properties.