Owners Manual

Monitoring Network Availability | Performance Monitoring
OMNM 6.5.2 User Guide 395
Create a Monitor for the External Script Adaptive ACLI
Now that you have verified the script is working, you can create a monitor to see how this attribute
is doing.
1 In the Monitors portlet, create a new ACLI Monitor
2 Uncheck Update Network Status (recommended since the ICMP monitor is already doing
this)
3 In Monitor Options select your example monitor configured previously.
4 Confirm that Monitor Attributes displays the Status attribute configured previously.
5 In the Conditions tab of the Monitor Editor, create “Status Up” condition, with the severity
of
Informational, and check Alert .
6 Create a criterion which is Status = 0.
7 Save this condition
8 Create a new Condition called “Status Down”
9 The criterion is Status = 1
10 Apply and Save
11 Save your monitor
NOTE:
You may want to test your monitor, in which case, you may want to change the interval to 30 seconds.
12
Right-click to select View Monitor Data, and you can see the results of your efforts.