Owners Manual

Monitoring Network Availability | Performance Monitoring
OMNM 6.5.2 User Guide 393
6 Add the next attribute. For no_adjacency use the RegEx: .*unresolved, (\d+) no
adjacency.*
7 Apply and Save the ACLI.
8 Select the ACLI and execute it, selecting the devices you want to monitor.
The audit panel catalogs the progress of the job, and the Execution History snap panel in the
expanded Actions portlet displays the execution, listing multiple executions by time and date.
Right-click an execution listed, and select
Results to see the results.
Create the Monitor
Follow these steps to monitor the Adaptive CLI created in the previous section.
1 Create a new monitor, select Adaptive CLI as the type.
2 Name the monitor, set the polling interval.
3 Select device(s) to monitor and then select the ACLI you just created. Notice that the
attributes appear in the
input parameters tab.
4 Under the Monitor Attributes tab, use the defaults.
5 Set any thresholds you like in the Thresholds node. This example monitors normal
functionality so it includes no thresholds.
6 When you save the monitor it begins working and executes the ACLI every polling cycle,
extracting the data.