Owners Manual

Supported Cisco Equipment 46
• Driver support added for Cisco SFTP, IE-30004-TC, IE-30008-TC, ASR 1002-X,
3850-48P-S. (24682, 2871)
• New Cisco Metro Ethernet SLA Monitor (24633)
• Cisco devices running IOS or IOS-XR can calculate bandwidth. Consult the
Monitoring Chapter of the User Guide for details. (24997)
• Added support for the following devices: Catalyst 4500 L3 Switch, Catalyst 6500,
CBS31X0, C1900, Catalyst WS-C4948-10GE, Router 3600, Router 3800, Router
3900, Nexus 3064, Nexus 5548, Nexus 6506, 6509, 6513, Nexus 7000, 7010,
7018,(24682, 23808, 24012)
• In configuration management, OMNM uses either SCP or SFTP depending on
which one is supported. If both are supported, whichever it finds first. If you
select Default as the Transfer Protocol, OMNM chooses in order of higher priority:
SCP/SFTP > FTP > TFTP. (24682)
• Cisco IPSLA Monitor provides end-to-end service verification. Alarms appear in
the Service Details Panel and service topology. (18423)
• Support for second generation Cisco devices, including 1921. (19665)
• Discovery—Dell OpenManage Network Manager must be authorized to set CLI
session parameters; permissions-related timeouts may occur during device access
if it is not. For example, Cisco CLI access requires the command
set terminal
length 0
. (20679)
• Cisco IOS-based devices now support web interfaces for backup, restore, deploy
and direct access. OMNM no longer has an option to restore running or startup
configurations. Such devices always restore to the running configuration, then
copy to startup for IOS versions below 12.4. For versions 12.4 and greater, devices
no longer merge, but use the
configure replace command to restore the new
config file cleanly then copy to startup. (14004)
Known Issues
• OMNM does not currently support deployment of Cisco Nexus devices. (30812)
• Initial discovery of Cisco XR devices could fail while configuring the SNMP trap
settings on the device. This could be because the application couldn't login to the
devices as the number of cli sessions to the device was maxed out. If this
happens, the snmp trap setting can be done by running the snmp task from the
actions portlet against the xr device. (29389)
• Nexus configuration restore to start-up is not supported. When you attempt this,
an error including
This command is deprecated appears on 3000 series devices.
On 5000 series, the error is
sysmgr_copy_nvram_dest_action: src uri_type
= 1 is not supported yet
. (25242)
• An Adaptive CLI whose script is
show protocols fails for devices with IOS
12.4(9)T7 firmware. No such issue exists in the newest version of IOS 12.4T
which is 12.4(24)T.
Workaround: Update the device’s firmware. (23132)
• LLDP link discovery on switches running old versions of Cisco IOS 12.2 (pre-55
revision) not supported. Workarounds: Upgrade the IOS version. Alternatively,
enable CDP and find the link using CDP instead. (16468)
• OMNM only supports Cisco router to router, or router to switch ethernet link
discovery when the CDP is turned on for ports on each end. For other vendors,
you must have LLDP active, or ethernet link discovery is not supported. (16261)
• Cisco Firewall Services do not backup, restore, deploy and Direct Access. (15765)