Manualshelf

Owners Manual

ManualsBrandsDell ManualsComputer equipmentOpenManage Network Manager
11121314151617181920
Table Of Contents
New Features/Devices Supported in 6.2 Service Pack 2
18
New Features/Devices Supported in 6.2 Service Pack 2
• Driver support added for Cisco LSSB SF 200-xx, SF 300-xx, SF 302-xx, SF 500-xx,
SG 500-xx; SG 500X-xx models. (28388)
• Added 6.3.0.19 firmware support for Dell Networking N1xxx, N2xxx, N3xxx,
N4xxx models. (28389)
• Web links were added for end users to download FTOS and DNOS firmware:
To execute FTOS firmware download feature, go to Image Repository and right
click within a table and select Download Firmware for/Dell FTOS. Log into a
website and proceed to location of desired FTOS series to download the firmware.
To execute DNOS firmware download feature go to Image Repository and right
click within a table and select Download Firmware for/Dell DNOS. Click on
“Choose from all products.” link and select desired switch. (28391)
• The following monitors were added: Cisco Ethernet SLA, Cisco IP SLA, Cisco
QOS, Juniper COS, Juniper RPM. (28136)
• IPSLA monitor now supports class of service TOS threshold alarms. (3746)
• Polling data from IP SLA monitors can now be filtered by SLA key and/or TOS.
(20304)
• Traffic Flow Analyzer now supports IPFIX. (27240)
• Traffic Flow Analyzer was enhanced to allow for grouping and querying for
exporters by equipment manager and by subcomponent (port or interface). The
Traffic Flow Exporters summary portlet now shows the exporters by equipment
manager only. From the Managed Equipment portlet, selecting the “Show Traffic
as Exporter” menu item will navigate to the maximized Traffic Flow portlet and
the context will be set to show the traffic flow data for the selected equipment
manager. A new “Traffic Flow Analyzer” menu group was added to both the Ports
and Interfaces portlet, which expands to show the menu item “Show Traffic”
which when clicked will navigate to the expanded Traffic Flow portlet and the
context will be set to show the traffic flow data for the selected subcomponent.
(27394)
• Reports for Traffic Flow Analyzer data can now be filtered by exporter. Each TFA
entity type now has two new filter attributes: Exporter Equipment Manager and
Exporter Subcomponent (28054)
• Traffic Flow Analyzer was enhanced to allow for querying by flow direction. This
information is read from the flow packet (sFlow, Netflow, or IPFIX) and saved to
the database. The available options are Ingress, Egress, and Both Ingress and
Egress, the latter of which is the default setting. (24935)
• Trend reports can now be generated for Traffic Flow Analyzer data. (28055)
• A new column named 'Deployable' is now added to Monitor status summary
panel that says why the target is deployed or not deployed. (28070)
• Network Topology was enhanced to preserve link coordinates in saved topology
views. (3340)
• The field 'Maximum Entities Per Graph' was added to Trend Report Template
editor allowing user to set the maximum member of entities shown per graph
within trend report. See Report Template Editors in User Guide for more details.
(20237)