Web Client Guide

Actions Portlet | Actions and Adaptive CLI 345
Date
Default Value —Enter a default date, or use date icon to display a calendar where you can select
one. Click off the calendar to make it disappear.
Val id Va lu es —Enter valid date values above the list, and click the green plus to add them to the
list.
Decimal
Default Value —Enter a single or range of default decimal values.
Constraints —Enter a range of acceptable numbers separated by a colon. For example, Constraints
= 2:4096. At runtime, a field where you can enter numbers. validates that entered numbers
are between 2 and 4096 when running the Adaptive CLI. If you enter a number outside this
range, a validation message appears and the attribute name turns red. You can also include
several numbers or ranges separated by the pipe (|) character. If you specify a range, the
lowest number must be to the left of the highest number. For example 9:99|999:1010.
Val id Va lu es —Enter valid decimal range values, and click the green + (the red - removes them).
You can manage these as described in Coded Value above.
IP Address
See also Validating IP Address Variables on page 346.
Default Value —Enter a default IP Address.
Val id Va lu es —Enter valid values as described in Coded Value above. Check IP Mask , Subnet,
Allow 32 Bit Mask,
and Allow Any Valid Ip in the Properties tab if you want the values
entered to be those.
Editable Valid Values —Check to enable editing of default or entered IP addresses.
Integer
Default Value —Enter a default integer.
Constraints —Enter a range of acceptable numbers separated by a colon. You can also include
several numbers or ranges separated by the pipe (|) character. If you specify a range, the
lowest number must be to the left of the highest number. For example 9:99|999:1010.
Val id Va lu es —Enter ranges of valid values as described in Decimal above.
Editable Valid Values —Check to enable editing of default or entered integer.
Long
Default Value —Enter a default long.
Constraints —Enter a range of acceptable numbers separated by a colon. You can also include
several numbers or ranges separated by the pipe (|) character. If you specify a range, the
lowest number must be to the left of the highest number. For example 9:99|999:1010.