Web Client Guide

Managed Resources | Resource Management 175
Network Details
This displays network information like VLAN(s) by ID, VLAN(s) by Port and STP Data. Use the
pick list in the upper right corner of this snap panel to select which to display.
Utilization Summary
A graph of the device utilization, typically for CPU, Disk I/O, Memory and ping rate.
Bandwidth Utilization
A graph of the device’s bandwidth utilization. Notice that you can change the number of top
interfaces graphed, when this is applicable.
New Link
When you create a new link, the Link Details screen appears where you can configure the link.
This screen has the following fields:
Link Name —A text identifier for the link.
Link Type —Select the type of link from the pick list.
A End Point Resource / Address —Click the plus (+) to select a resource for one end of the link.
When you right-click a selected resource, it automatically appears here. Click the minus (-) to
remove it.
Z End Point Resource / Address —Click the plus (+) to select a resource for one end of the link.
When you have selected two resources, they automatically appear as A and Z endpoints.
Tip
Remember, you can only multi-select in the expanded version of the portlet.