Owner's Manual

878 Deploying
3 Select the desired network elements in the table and then click on the Deploy… menu item
in the
Action or right-click menu. This launches the deployment form.
The appearance of this screen may be different for some devices.
4 The table shown under Available Software displays all the software entries available for the
network element(s) selected.
5 When you click on a table row in the Available Software tab, the software row selected has
already been validated against all the network element entries in the list (The validation
checks if the vendors for the network elements in the list are included as providers of the
equipment to which the software may be applied.).
6 When you select a row in the Available Software table, File Management activates the Deploy
Now
and Schedule Deploy buttons on this screen.
Depending on the installed drivers, for some devices, you can also elect to
Remove unused
operation images
and Reboot Device with the check boxes in the Vendor Configuration
portion of the screen. The
Current Operation Code Version and Current Operation Code
Image
fields are read-only.
Other vendor panels include a pick list for a deployment
Protocol ( TFTP / FTP ), a File System
on the device, and you may enable Verify Install with a checkbox, if the device has this
capability. This checks whether the active software is verified (and possibly repaired) for
consistency. This is performed after the specified software is installed during the deploy
process.