Owner's Manual

Backing Up / Restoring 867
Select the two listed files you want to compare, and click the Compare button.
The resulting dialog shows the two files side-by-side.
Figure 36-11. File Comparison
Differences between the two files are highlighted (the Legend in the lower left corner of this panel
describes the significance of the colors).
Backup
To use the backup function, follow these steps:
1 Launch the Resources manager.
2 Using a filter, retrieve the list of network elements; they appear in the Resource manager
table.
3 Select the desired network elements in the table and then click on the Backup button. (See
Figure 36-1, Resources Screen with NetConfig Menu Open on page 857).
4 When you click the Backup… button, the form that appears next shows the network
elements selected from the resource manager. The combo box in the
Configuration File
section shows the list of already used configuration file names for that particular network
element. Clicking the
Add button lets you add a different file name. Click Save and the added
file appears in the pick list.