Owner's Manual

Security 83
- Use for EMS —Checking this lets this application—the entire element management system
(EMS)—use this authentication. Otherwise, authentications are only available to individual
users who have permissions to use them.
If none of the associated credentials are marked
Use for EMS then the software chooses the
set of authentications to which the current user has access. Administrators typically use this
capability to control access to cut-thru session capabilities (read vs. read-write) when a
command line interface is present to the managed device.
NOTE:
Resync fails if you do not check this box.
Select EMC Parameters
- User Name — The User ID that this object uses to login to EMC devices.
-
Password — The password for the User ID this object uses.
-
Confirm Password — Confirm the password.
Confirm your entries here with
File -> Save or by clicking on the Save icon or button.
FTP
You can also enter authentication information for FTP:
Figure 4-11. General (FTP) Page
Enter the following fields:
General Parameters
- ID —The FTP authentication object name.
-
Use for EMS —Checking this lets this application—the entire element management system
(EMS)—use this authentication. Otherwise, authentications are only available to individual
users who have permissions to use them.