Owner's Manual

806 Alarms
in the provided spaces, then click Send. Clicking Cancel ends this operation without sending
e-mail. Refer to the
Administration Section for instructions about setting up e-mail from this
software.
-
Clear Alarm —Select this option to clear the alarm. Clearing the alarm removes the alarm from
the default alarm view and marks it as a candidate for DAP. Essentially it is an indication to
the system that the alarm has been resolved/addressed. If propagation policies are enabled it
causes a recalculation of dependent alarms.
-
Print —Prints the displayed Alarms to a pdf file.
Figure 33-4. Printed Alarms (pdf)
You can print or save this report from Acrobat. If you do not have the free Acrobat reader, you
can download it from www.adobe.com.
-
Show Performance — When you select this command OpenManage Network Manager finds all
of the performance attributes being monitored for the selected equipment and creates a
dashboard with one dashboard component for each attribute. (See Chapter 32, Active
Performance Monitor for details.)
If you multi-select more than one device, each component shows the top five metrics for each
attribute. If you select only one top-level device, OpenManage Network Manager searches the
device's interface and port children for performance attributes and these attributes appear
with the top five children for each attribute.