Owner's Manual

794 Active Performance Monitor
MIB Browser
When you click Browse, MIB browser appears when you do so. Select the MIB (top left), and the
MIB variable (bottom left), and confirm the variable is the correct performance indicator (right
panel) before adding this variable to a monitor with the
Select button at the bottom of this
browser. Not all values are necessarily available (or sensible) to monitor.
Figure 32-22. MIB Browser
Notice that you can use the Add / Delete buttons near the top, left of this screen to add or delete
new MIBs, too. You can check
Show OIDs in the bottom left corner of the screen to display the
numeric values for OID nodes in the MIB tree.
SNMP monitoring of Counter64 types cannot return values greater than
9,223,372,036,854,775,807 (the maximum signed 64-bit value). Counter64 types can capture the
change per polling interval. This works, but the change must be less than the allowed maximum
value or the application drops it.
NOTE:
Monitoring generally is currently limited to the maximum value of a signed 64-bit number.