Owner's Manual

770 Active Performance Monitor

Monitors

This screen manages monitor configurations for Active Performance Monitor.

Figure 32-2. Monitors

Configured monitors appear at the top of the screen. The topmost line includes a filter to limit this

list. Click

to refresh the list or enforce the filter. Monitors appear with an icon (green, red or

yellow) indicating the monitor is

Available, Not Available,

or has received only

Partial Results.

Availability is archived even if all other data types are not if a retention policy exists for the monitor.

Right-click a monitor, or after selecting it, click the

Action

button to see the following capabilities:

New—

This menu item creates a new monitor. See Creating or Updating a Monitor on page 771.

The next screen lets you pick the type of monitor to create. The contents of this menu

depend on which options you have installed.

Open—

Edit an existing, selected monitor. See Creating or Updating a Monitor on page 771.

Delete

—Remove a listed monitor.

Copy

—Copy a listed monitor as the basis for a new one. This copies the entire content of the

monitor including attributes, targets, intervals and so on. You must rename the copy.

NOTE:

You must manually delete the monitored targets from copied monitors for them to work correctly.

Enable / Disable

—Click one of these to enable or disable the selected monitor, to begin polling

the target devices as defined within the monitor.