Owner's Manual

740 Filters
The following items are potential fields for the filter to match:
-
Contact —Click on the command button to select a contact.
-
Firmware ver — The firmware version (text).
-
Hardware ver — The hardware version (text).
-
Location —Click on the command button to select a location.
-
Model — The equipment’s model designation (text).
-
Name —Enter a name or portion of a name.
-
Role —From the drop-down list, select an equipment role.
-
Software ver — The software version (text).
-
Ty p e —Select an equipment type from the drop-down list.
-
Vendor —Click on the command button to select a vendor.
-
IP Address — The IP Address (range) of the device (text).
Click on
Set as Default to set the selected filter as the default view. Clicking Set as Default means
the configured filter automatically appears each time this screen opens. Click on
Save to save and
apply the filter. The list of items appears based on the filter you created, and the manager from
which you open the filter.
NOTE:
A default set of filters comes with the application. Criteria vary, depending on the manager.
Advanced Settings
This portion of the Filter Editor screen appears when you check the Advanced checkbox in the
Filter editor. This checkbox only appears when you select a
***New*** filter, from the Filter Title
pick list. Permission to configure these aspects of filtering is typically confined to application
administrators and developers. When permissions are unavailable, the
Advanced checkbox does
not appear.