Owner's Manual

Group Operations 693
- Notes —A text field where you can enter notes about the group operation you are creating.
-
Last Run —(Read only) The time this operation last ran.
-
Created —(Read only) The time you created this operation.
-
Modified —(Read only) The time you last modified this operation.
-
Preview —Click this button so the application can test the group operation against the
equipment in the selected group. The subsequent screen tells whether the devices support
the action.
Figure 22-2. Group Operations Preview Screen
You can proceed with the group operation, or abandon it, as appropriate, based on this screen.
NOTE:
Some ACLI (Adaptive CLI) Group Operations also request parameters. Supply them in the screen that
appears after you select the group operation. The ACLI will run only on target devices within the selected
group that support it. To use the full capabilities of ACLI, you must have Perl installed.
Action Screen
The next screen (click Next to get there) lets you specify the parameters for the action you selected
in the first screen. Here are some action screens that can appear:
•DNS Servers
• Gateway
• Network Services
• Port Speed & Duplex
• System Information
•Time Servers
•Task
•Batch Operations