Owner's Manual

Locations 649
18
Locations
Locations Overview
You can specify equipment locations within the Locations screen. Note that locations can have
“Parent” Locations, they can be subsets of another location. For example, if network objects are on
the third floor of a facility, you can designate both the building and the specific floor as locations;
the building would be the parent of the floor.
To access the Locations screen, select
Inventory -> Locations from the File -> Open ->
NetManagermenu or the Navigation Window. The Locations screen appears.
Figure 18-1. Locations Screen
The drop-down menu at the top of the window lets you apply a top-level location filter to restrict
the display. Click
Go when the Locations screen opens to display all defined locations.
CAUTION:
Unless you create a filter and save it as described in Chapter 28, Filters, any filters you create
here are not preserved.