Owner's Manual

630 Ports
CLI-Based Discovery
For some supported devices, reading the SNMP MIB is not as reliable as command-line interface
(CLI) interaction, so this application uses the latter.
Scheduling Learned MAC Discovery
If you create a new schedule and select Learned MAC Discovery , you must simply name this
schedule and then select the devices where you plan to discover learned MAC
addresses.
Figure 14-3. Scheduling Learned MAC Discovery
Click Add or Add Group to select devices individually or by equipment group. The Remove button
deletes any device or group you select in this list. Use the
Schedule Info screen to configure the
time this discovery is to run. See Schedule Info on page 750 for more about the Schedule Info
screen.
CAUTION:
OpenManage Network Manager does not come with a database aging policy (DAP) for learned MAC
address, by default. You must create and schedule one for it to be effective in limiting the impact of
Learned MAC Discovery on the database.