Owner's Manual

620
The Configure button at the bottom of these screens executes the desired configuration on the
selected equipment.Click the
Refresh button to re-query for these items.
Configure -> Clear Channel
You can convert channelized interfaces into clear channel (no partitions) by configuring clear
channel options.
Figure 13-167. Channelized Interface Configure -> Clear Channel (no partition)
If partitions exist for the selected interface, the application warns that setting up the clear channel
deletes them. This screen has the following configurable fields:
-
Enable Clear Channel —Check to use the channelization interface as a clear channel.
-
Interface type —Select from a pick list.
The
Configure button at the bottom of these screens executes the desired configuration on the
selected equipment.Click the
Refresh button to re-query for these items.