Owner's Manual

619
Channelized Interface Configure -> Partitions
You can add, edit and delete partitions for channelized interfaces from the port configuration
screen.
Figure 13-166. Channelized Interface Configure -> Partitions
A warning appears if a clear channel exists for the selected interface. Adding a partition deletes the
clear channel. Click
Add (or select an existing partition listed at the top of the screen, and click
Edit ), and configure the partition in the fields and selector at the bottom of the screen. Click
Export to save a description of these items in a file. Click Apply to accept your edits, or Cancel to
abandon them. This screen has the following fields:
-
Partition —A partition number.
-
Interface Type —Select from the pick list.
-
Timeslots —The available timeslots appear on the left of the screen. Use the arrows between
Available and Selected boxes to select timeslots for this partition. You can also re-order
Selected timeslots with the arrows below that portion of the screen.