Owner's Manual

610
- Priority —Specifies the system logging priority level. Select from the pick list.
-
LogPrefix —Sets the system logging prefix value. Enter a string.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Channelized PICs -> Channel Groups
This screen (or one like it) appears for channelized QPP and channelized PIC selections (PIC
level).
Figure 13-158. Channelized: Channel Groups
To edit a node on the displayed tree, click the node, then click Edit . An edit screen like the one in
Channel Properties on page 611, or in DS0 Channel Properties on page 612 (depending on the type
of node) appears in the lower portion of the screen. The “trident” icon indicates a channelizable
node, while the standard port icons indicate that node is not channelizable.
Select Use the
Add or Remove buttons to further manage nodes in the table. Enter text in the edit
screen, once you add a node.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
For more about Audit History, see Audit / Results on page 184.
Channelized PICs
Some Channelized QPP PICs allow the creation of multilevel channels. For example with the new
Channelized OC-12 QPP PIC (CHOC12) you can channelize the CHOC12 down to Channelized
OC-1's. You can channelize these OC-1's further to Channelized T3's or Channelized T1's and so
on, all the way to the DS0 level.