Owner's Manual

604
Figure 13-150. Unit Multilink Frame Relay UNI NNI protocol
Enable —Enable/Disable Family option on logical interface.
Bundle —Logical interface name this link joins.
Ccc - Circuit Cross-Connect
This screen configures circuit cross-connect parameters.
Figure 13-151. Ccc - Circuit cross-connect
Enable —Enable/Disable Family option on logical interface.
-
Filter Group —Group where this interface is a member.
-
Input Filter —Filter applied to received packets.
-
Output Filter —Filter applied to transmitted packets.
-
Input Policer —Policer applied to received packets.
-
Output Policer —Policer applied to transmitted packets.
-
Don't strip control bytes —Do not strip PPP address and control bytes.
-
No Asynch Notification —Do not send asynchronous notification upon link failure.
-
Translate DE —Translate Discard Eligible bit.
-
Translate FECN & BECN —Translate FECN and BECN bits.
Tcc - Translational Cross-Connect
This screen configures translational cross-connect parameters.