Owner's Manual

601
Source Address —Interface address prefix.
Destination Address —Interface address destination.
Input / Output Service —Select from the pick list.
Filter Group —Group of which this interface is a member.
Input Filter —Filter applied to received packets.
Output Filter —Filter applied to transmitted packets.
ARP Policer —Policer applied to arp packets. (see
Input Policer —Policer applied to received packets.
Output Policer —Policer applied to transmitted packets.
MTU —Maximum transmit packet size (256 - 9192).
Iso - OSI ISO protocol
This screen configures ISO parameters.
Figure 13-145. Unit OSI ISO Protocol
Enable —Enable/Disable Family option on logical interface.
MTU —Maximum transmit packet size (256 - 9192).
Enter an ISO Network address at the bottom of this screen, then click
Add to list it in the table on
the left. Click
Delete to remove a selected existing row, and Apply to accept your changes.
inet6 - IPv6 protocol
This screen configures Inet6 parameters.
Figure 13-146. Unit Inet6 - IPv6 Protocol