Owner's Manual

591
16–16-bit mode
32–32-bit mode
- Framing —Options include:
esf–Extended super frame
sf–Super frame
- Idle Cycle Flag —Value to transmit in idle cycles.
flags–Transmit 0x7E in idle cycles
ones–Transmit 0xFF (all ones) in idle cycles
Serial
This screen lets you configure serial options.
Figure 13-137. Interfaces—Serial
This screen has the following fields:
-
Enable —Check to enable
-
Clock Rate —Select from the pick list.
-
Line Encoding —Select from the pick list.
-
Loopback Mode —Select from the pick list.
-
Clocking Mode —Select from the pick list.
-
Line Protocol —Select from the pick list.
-
Invert Transmit Clock —Check to enable