Owner's Manual

590
pseudo-2e28–Pattern is 2^28 - 1
pseudo-2e29–Pattern is 2^29 - 1
pseudo-2e3–Pattern is 2^3 - 1
pseudo-2e31–Pattern is 2^31 - 1
pseudo-2e32–Pattern is 2^32 - 1
pseudo-2e4–Pattern is 2^4 - 1
pseudo-2e5–Pattern is 2^5 - 1
pseudo-2e6–Pattern is 2^6 - 1
pseudo-2e7–Pattern is 2^7 - 1
pseudo-2e9-o153–Pattern is 2^9 - 1 (per O.153 standard)
repeating-1-in-4–1 bit in 4 is set
repeating-1-in-8–1 bit in 8 is set
repeating-3-in-24–3 bits in 24 are set
- Buildout —Line buildout. Options include:
0-132–Line buildout is between 0-132 feet
133-265–Line buildout is between 133-265 feet
266-398–Line buildout is between 266-398 feet
399-531–Line buildout is between 399-531 feet
532-655–Line buildout is between 532-655 feet
- Byte-encoding —Byte encoding. Options include the following:
nx56–7 bits per byte
nx64–8 bits per byte
- Loopback mode —Options include:
local–Local loopback
payload–Payload loopback
remote–Remote loopback
- Start/End Flag —Set start/end flags on transmission. Options include:
filler–Send two idle cycles between start/end flags
shared–Share start/end flags on transmit
- Line encoding —Set line encoding with the following options:
ami–Automatic mark inversion
b8zs–8-bit zero suppression
- Frame checksum —Options include: