Owner's Manual

582

LACP Periodic

—By default, the actor and partner send LACP packets every second. You can

configure the interval at which the interfaces send LACP packets in this field.

Minimum Links

—Enter the minimum number of links. On aggregated Ethernet interfaces, you

can configure the minimum number of links that must be

for the bundle as a whole to be

labeled

. By default, only one link must be up for the bundle to be labeled up.

Sonet

This screen configures Sonet options.

Figure 13-131. Interface—Sonet

The

Enable

checkbox lets you use the following fields:

General Sonet Options

Aggregate AS

—Join a SONET aggregate

Frame Checksum

—Configure frame checksum to default, 16 bit mode or 32 bit mode

Loopback

—Set loopback to default, Local or Remote

VT Mapping

—Set VT mapping mode to ITU-T or KLM

Payload Scrambler

—Enable/Disable payload scrambling