Owner's Manual
579
Hold Time
This screen configures the hold time for link up and link down.
Figure 13-126. Interface Configuration—Hold Times
The checkbox (
Over-ride default hold times
) enables the following fields:
-
Up Time
—Link up hold time (0 - 65,534 milliseconds)
-
Down Time
—Link down hold time (0 - 65,534 milliseconds)
Ethernet
This screen configures ethernet parameters.
Figure 13-127. Interface—Ethernet
-
Link Mode
—Link operational mode (
Full Duplex
or
Half Duplex)
.
-
Speed
—Link speed, 10m or 100m (Fast Ethernet only).
-
MAC
—Hardware MAC address.
-
VLAN Tagging
—802.1Q VLAN tagging support.
-
Stacked VLAN Tagging
—Stacked 802.1Q VLAN tagging support (Gigabit Ethernet only).
-
Gratuitous ARP Reply
—Enable/Disable gratuitous ARP reply.
-
Ignore gratuitous ARP request
—Ignore gratuitous ARP request.