Owner's Manual

577
cisco-hdlc-ccc—Cisco-compatible HDLC framing for a cross-connect.
cisco-hdlc-tcc—Cisco-compatible HDLC framing for a translational cross-connect.
ethernet-ccc—Ethernet cross-connect.
ethernet-over-atm—Ethernet over ATM encapsulation.
ethernet-tcc—Ethernet translational cross-connect.
ethernet-vpls—Ethernet Virtual Private LAN Service (VPLS).
extended-frame-relay-ccc—Any Frame Relay DLCI for cross-connect.
extended-frame-relay-tcc— Any Frame Relay DLCI for translational cross-connect.
extended-vlan-ccc—Nonstandard TPID tagging for a cross-connect.
extended-vlan-tcc—802.1Q tagging for a translational cross-connect.
extended-vlan-vpls—Extended VLAN Virtual Private LAN Service (VPLS).
flexible-frame-relay—Multiple Frame Relay encapsulations.
frame-relay—Frame Relay encapsulation.
frame-relay-ccc—Frame Relay for cross-connect.
frame-relay-tcc—Frame Relay for translational cross-connect.
multilink-frame-relay-uni-nni—Multilink Frame Relay UNI NNI (FRF.16) encapsulation.
ppp—Serial PPP device.
ppp-ccc—Serial PPP device for a cross-connect.
ppp-tcc—Serial PPP device for a translational cross-connect.
vlan-ccc—802.1Q tagging for a cross-connect.
vlan-vpls—VLAN Virtual Private LAN Service (VPLS).
Status
—Enable or Disable the physical link
Description —Text description of interface
MTU —Maximum transmit packet size (256 - 9192)
Clocking —Interface clock source. This has the following potential values:
external—Clocking provided by DCE (loop timing).
internal—Clocking provided by local system.
- Traps —Enable SNMP notifications on state changes
-
Passive Monitor —Use interface to tap packets from another router
-
Per Unit Scheduler —Enable subunit queueing on Frame Relay or VLAN QPP interface
-
DCE —Respond to Frame Relay status enquiry messages