Owner's Manual

575
Click Apply to accept your edits, and Cancel to abandon them. The Configure button at the
bottom of this screen sends your login(s) to the device. The
Refresh button queries to update
information displayed.
PIC Configure -> Chassis Hardware
This screen appears when you open a selected PIC in Equipment Manager.
Figure 13-123. PIC Chassis Hardware
It has the following fields:
Chassis Hardware Options
- No Concatenate —Do not concatenate channels.
-
PIC buffer —Run in large delay buffer mode.
-
Sparse Data-Link —Run in sparse data-link connection identifier mode.
-
Framing —Framing mode. Select from the following: default, SDH, Sonet .
-
Max Queues —Maximum number of queues per interface on QOS-capable PIC ( - 4, - 8). This
attribute is on only these devices: M320, T320, T640 & Tx Matirx.
-
VT Mapping —Virtual tunnel mapping mode. Select from the pick list ( default, ITU-T, KLM ).
-
Multilink Bundles —Number of multilink Frame Relay UNI NNI (FRF.16) bundles to allocate
on PIC (1-255)