Owner's Manual

569
Logging Settings
Configure the Facilities and Priorities to log on the console. See Console Logging Settings: on page
564 for a description.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
System Authentication -> Authentication Order
This screen manages the order in which authentication occurs.
Figure 13-118. Authentication Order
The available authentication types appear here in the Available panel. To override the default
order, use the arrows (>) to move the authentication types to the right,
Selected panel. Select and
move them to the order you want authentication to occur with the up/down arrows.
The
Configure button at the bottom of these screens executes the desired configuration on the
selected equipment.Click the
Refresh button to re-query for these items.
System Authentication -> Radius / TACACs
You can configure the router to use Radius or TACACS+ authentication. You can also specify
multiple servers for each type. This authentication supports the following specific attributes:
Allow-commands, Deny-commands, Allow-configuration, Deny-configuration.