Owner's Manual

561
Floor —Floor number.
Rack —Rack number.
System -> Loopback
This screen manages loopback settings.
Figure 13-112. Loopback
Here are the fields on this panel:
-
Unit —Unit number is always 0. (read only)
-
Traps —Check to enable traps.
-
Passive Monitor —Check to enable.
-
Description —A text description.
Family
Use Add (adds the address entered below the table) and Delete to manage rows in the inet and iso
tabs. These are the loopback inet and iso IP addresses.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
System -> Services
This screen manages system services settings.