Owner's Manual

558
This screen has the following fields:
Host Name —Hostname for this router.
Domain Name —Domain name for this router.
The following two tables let you enter an IP address or domain in the field under the table. Click
Add to add this list to the table. Select an item and click Delete to remove a listed item. Click
Apply to accept the list. Here are the listed items:
DNS Servers —An ordered list of DNS servers.
Search Domains —An ordered list of search domains.
Backup Routers
These fields define backup Ipv4 and Ipv6 routers to use while booting
IPv4 Backup Address —IPv4 router to use while booting
Destination (optional)—Destination network reachable through the router
Ipv6 Backup Address —IPv6 router to use while booting
Destination (optional)—Destination network reachable through the router
Craft Interface RS-232 ports
Configure console ports on the router in this portion of the screen.
Console —Define Terminal type.
Ansi—ANSI-compatible terminal
small-xterm—Small (24-line) xterm window
vt100—VT100-compatible terminal
xterm—Large (65-line) xterm window
- Auxiliary —Define Terminal type. Here are the options:
Ansi—ANSI-compatible terminal.
small-xterm—Small (24-line) xterm window.
vt100—VT100-compatible terminal.
xterm—Large (65-line) xterm window.
Checkbox options:
Insecure —Disallow superuser access
Logout —Log out the console session when cable is unplugged
Options
Configure the selected devices with the following checkboxes:
•
Use default address (for locally originated traffic).