Owner's Manual

557
Targets
These are the IP addresses to receive traps. Enter the IP address of the target in the field above the
table, then click
Add to enter a target IP in the list. Select a listed target and click Delete to remove
it.
Trap Categories
Check the categories of traps you want to receive ( Authentication, Chassis, Configuration, Link,
Remote-Operations, Rmon-Alarm, Routing, Startup, Vrrp-Events,
and Sonet Alarms ).
-
Receive all traps —Check all categories.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
System -> General
This screen configures a variety of general settings for the selected device.
Figure 13-109. System -> General