Owner's Manual

554
- Tag —Associate an OSPF tag with a static, aggregate, or generated route.
The Bidirectional Forwarding Detection (BFD) protocol is a simple hello mechanism that detects
failures in a network. BFD works with a wide variety of network environments and topologies. The
failure detection timers for BFD have shorter time limits than the failure detection mechanisms of
OSPF, providing faster detection. These timers are also adaptive and can be adjusted to be more or
less aggressive.
-
BFD Min Interval —Minimum transmit and receive interval for failure detection.
CAUTION:
Specifying an interval smaller than 300ms can cause undesired BFD flapping.
Range: (1…255000 milliseconds
-
BFD Multiplier —Detection time multiplier for failure detection.
Next Hops
This specifies the device is to reach the next-hop router by specifying IP addresses. Enter an
address below the list space and click
Add to list it there. Click Delete to remove one, or Apply to
change a selected one.
SNMP -> Community
This panel manages the SNMP community permissions for the selected device.
Figure 13-107. SNMP: Community