Owner's Manual

552
- Multipath - VPN Unequal Cost —Apply protocol-independent load balancing to VPN routes
that are equal until their interior gateway protocol (IGP) metrics with regard to route
selection. If you do not configure the vpn-unequal-cost statement, protocol-independent load
balancing is applied to VPN routes that are equal until their router identifiers with regard to
route selection.
-
Graceful Restart —Configure graceful restart.
-
Restart Duration —The restart-duration option sets the period of time the router waits for a
graceful restart to complete. You can configure a time between 1 through 600 seconds. The
default value is 300 seconds. At the end of the configured time period, the router performs a
standard restart without recovering state from the neighboring routers. This disrupts VPN
services, but is probably necessary if the router is not functioning normally.
-
Disable Graceful Restart —Disable graceful restart at this level.
-
Max Routes Limit —Set the route limit. If the device reaches this limit, a warning occurs and the
device rejects any additional routes. Range: 1 through 4,294,967,295 Default: Not set
-
Max Routes Threshold —Threshold value for the mandatory limit that triggers a warning. Range:
1 through 100
-
Maximum Routes Log Only —Sets the route limit as an advisory limit. An advisory limit triggers
only a warning, and additional routes are not rejected.
-
Route Types —This pick list sets the appearance of the lowest part of the screen. Available
options include the following:
• Aggregate Routes
• Static
Aggregate Routes
Use the Add, Edit or Delete buttons to the left to manage these listed routes. Click Apply to accept
your edits, or
Cancel to abandon them. When you Add or Edit , the following fields appear in an
editor:
-
Destination Prefix —Configure aggregate routes. Network portion of the IP address, and prefix-
length is the destination prefix length.
-
Preference —Preference value for a static, aggregated, or generated route. lower number indicates
a more preferred route. Range: 1 through 255 Default: 5 (for static routes), 130 (for aggregate
and generated routes)
-
Metric —Metric value for an aggregate, generated, or static route. Range: 1 through 65,535
-
Tag —Associate an OSPF tag with a static, aggregate, or generated route