Owner's Manual

550
RIP
This screen configures the RIP portion of the VRF.
Figure 13-104. Routing Instances -> VRF Instances - RIP
Rip Groups Configure a set of RIP neighbors that share an export policy and metric. The export
policy and metric govern what routes to advertise to neighbors in a given group. This screen has the
following fields:
-
Name —Name of a group, up to 16 characters long.
-
Preference —Preference of external routes learned by RIP as compared to those learned from
other routing protocols. A lower value indicates a more preferred route. Range: 0 through
4,294,967,295 (232 -1) Default: 100
-
Metric Out —Metric value to add to routes transmitted to the neighbor. Use this statement to
control how other routers prefer RIP routes sent from this neighbor. Range: 1 through 16
Default: 1
Export Policies
Apply a policy to routes being exported to the neighbors by using the arrows to move listed policies
from
Available to Selected . Name one or more policies.
Neighbors
Similar to Export Policies, select the name of interfaces over which a router communicates to its
neighbors.
Routing Options
This screen configures routing options for the VRF.