Owner's Manual

538
Aggregate Route Properties
- Destination —Destination address or network.
-
Active —Check to activate this route.
-
Ty p e —Select from the pick list. Options include Default, Active and Passive.
- Preference / Preference2 —Enter a preference value. A lower number indicates a more preferred
route (1-255). The second field on these lines indicates the type of route (1-16).
-
Metric / Metric2/ Metric3 / Metric4 —Enter a metric (1-65,535). The second field on these
lines indicates the type of metric (1-16).
-
Discard Packets —Check to drop packets to destination and send no ICMP unreachable
messages.
-
Full —Check to include all AS numbers from all contributing paths.
-
Brief —Check to include the longest common sequences from contributing paths.
Policy Filters
Select from the Available policy filters that appear on the left by clicking the arrows between
Available and Selected panels in this portion of the screen. Use the up/down arrows below the right
panel to re-order selected policies. Click
Apply to accept your edits for the table, Cancel to
abandon them.
Routing Instances -> Instances
This screen manages Routing Instances (interfaces and static routes).