Owner's Manual

537
Preference —Enter an LSP preference value (1 - 255).
NOTE:
The LSP Name blank field does not appear in the screen in Figure 13-95 because the pick list is not set to
Specify LSP.
The device only allows one P2MP to be configured. You can configure multiple next hop LSP
values.
The
Configure button at the bottom of these screens executes the desired configuration on the
selected equipment.Click the
Refresh button to re-query for these items.
Routing Options -> Aggregate Routes
This screen manages aggregate routes for the selected device.
Figure 13-96. Routing Options -> Aggregate Routes
The table at the top of this screen displays configured aggregate route instances. Add or Edit a
selected instance with those buttons to the right. Select a row and click
Delete to remove it. Click
Export to save a description of these items in a file. If you add or edit a row, the editor at the
bottom of the screen appears with the following fields and checkboxes: