Owner's Manual

536
Figure 13-94. LSP Next Hop
This screen has the following fields:
-
LSP Name —Select an existing LSP from the pick list or select Specify LSP from the pick list and
type in an LSP that has not been created on the field below the list.
Metric —Enter an LSP metric value (1 - 65,535).
Preference —Enter an LSP preference value (1 - 255).
P2MP LSP Next Hop
This tab configures Point-to-Multipoint (P2MP) LSPs.
Figure 13-95. Point-to-Multipoint (P2MP) LSPs
It has the following fields:
LSP Name —Select an existing LSP from the pick list or select Specify LSP from the pick list and
type in an LSP that has not been created on the field that appears below the list.
Metric —Enter an LSP metric value (1 - 65,535).