Owner's Manual

534
- Unicast Reverse Path —Select from the pick list. Options include Default, Active Paths, Feasible
Paths
.
The
Configure button at the bottom of these screens executes the desired configuration on the
selected equipment.Click the
Refresh button to re-query for these items.
Routing Options -> Static Routes
This screen manages routing options for static routes.
Figure 13-93. Routing Options -> Static Routes
The table at the top of this screen displays configured static routes showing destination address,
action, type and next hop address.
Add or Edit a selected route with those buttons. Click Export to
save a description of the listed routes. Click
Apply to accept your edits for the table, Cancel to
abandon them. Select a row and click
Delete to remove it. If you add or edit a row, the editor at the
bottom of the screen appears with the following fields and checkboxes:
-
Destination —Destination of the generated route.
-
Action —Must select one of the following from the pick list:
Forward Packets —Reach the next-hop router by specifying an IP address or an interface
name.
Reject Packets—Drop packets to destination; send ICMP unreachables.