Owner's Manual

528
- Protect Interface —Name of the protect interface.
-
Community Name —Community associated with this Layer 2 circuit.
-
Description —Text description of the Layer 2 circuit.
-
MTU Number —MTU to be advertised for this Layer 2 circuit (512 - 65535).
-
PSN Tunnel —Endpoint of the transport tunnel on the remote PE.
-
Control Word / No Control Word —Check Control Word to enable the use of control word.
Check
No Control Word to disable control word.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
L2 Circuit -> Local Switching
This screen configures local switching interfaces for the selected equipment.
Figure 13-86. L2 Circuit -> Local Switching
The top of this screen lists Layer 2 local switching interfaces. Click Add (or select a row and click
Edit ) to see the editor in the lowest panel. Select a row and click Delete to remove it. Click Export
to save a description of these items in a file. Click
Apply to accept your edits, or Cancel to accept
them. The editor has the following fields:
-
Interface Name —Interface name. Cannot edit once configured. Click the Active checkbox to
activate this interface.