Owner's Manual

526
- Receive —Configure RIP receive options:
both - Accept both RIPv1 and RIPv2 packets
none - Do not receive RIP packets
version-1 - Accept RIPv1 packets only
version-2 - Accept only RIPv2 packets
- Send —Configure RIP send options:
broadcast - Broadcast RIPv2 packets (RIPv1 compatible)
multicast - Multicast RIPv2 packets
none - Do not send RIP updates
version-1 - Broadcast RIPv1 packets
Check zero
—Check reserved fields on incoming RIPv1 packets
Message Size —Number of route entries per update message (25 - 255)
Metric In —Metric value to add to incoming routes (1 - 15)
Note that you can re-order items with the arrows below or to the right of where they are listed.
Import Tab - Import policy
Use this tab to select policies to import.
Figure 13-84. RIP Policy Import
Notice that, in addition to the arrows moving policies from the Available to the Selected areas, the
arrows below and to the right reorder the listed selected policies.
Export Tab - Export policy
This tab is similar to the Import tab.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information appears.