Owner's Manual

523
- Hello Interval —Enter the number of seconds to designate how often the router sends PIM hello
packets out of an interface. Range: 0 through 255
-
Priority —Enter the router's likelihood to be elected as the bootstrap router. A higher value
corresponds to a higher priority. Range: 0 through a 32-bit number. Default: 0. (The router
has the least likelihood of becoming the bootstrap router and sends packets with a priority of
0.)
BFD Liveness Detection
- Minimum Interval —The bidirectional forwarding detection (BFD) minimum interval timer.
This timer specifies the same value for both the minimum transmit interval and minimum
receive interval for the bfd-liveness-detection statement. This specifies the minimum
transmit and receive interval. Range: 1 through 255,000 milliseconds
-
Minimum Receive Interval —The BFD minimum receive interval timer. This timer specifies
only the minimum receive interval for the bfd-liveness-detection statement. Range: 1 through
255,000 milliseconds
-
Transmit Threshold —Specifies only the minimum transmit interval for the bfd-liveness-
detection statement. Range: 1 through 255,000 milliseconds
-
Multiplier —The multiplier for BFD timers; the detection time multiplier. Range: 1 through 255
-
Version —The PIM version ( 0, 1, Automatic ).
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Protocols -> RSVP Interfaces
This screen manages RSVP interface settings.