Owner's Manual

522
The Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Protocols -> PIM Interfaces
This screen manages PIM interfaces for the selected device.
Figure 13-81. Protocols -> PIM Interfaces
Click Add to configure a new interface, or Edit to modify a selected, existing interface. If you want
to remove a listed interface, select it and click
Delete. Click Export to save a file describing items
listed here. When you
Add or Edit , the editor appears with these fields:
PIM Interface Properties
- Name —The interface’s identifier. Click Active or Disable to activate or disable this interface.
-
Mode —Select from the pick list to configure PIM to operate in sparse, dense , or sparse-dense
mode.
-
Version — Select a PIM version from the pick list.