Owner's Manual

517
Figure 13-75. Routing Protocols: ISIS Levels 1 & 2
Use the Add Edit and Remove buttons to manage rows in this table. Click Apply to accept your
edits and
Cancel to abandon them. When you add or edit an interface listed, an editor appears in
the lower portion of the screen. The following are its fields:
-
Name —Interface or Unit to which settings apply.
LSP Interval — Interval between LSP transmissions (milliseconds)
The following are checkbox options. Check to activate them:
-
Disable ISIS —For the named interface/unit (disable)
-
Passive —Do not run IS-IS, but advertise it (passive)
-
Enable checksum —For packets on this interface (checksum)