Owner's Manual

488
Figure 13-51. Routing Protocols -> Setup: OSPF General
- This screen has the following fields:
General Settings
- Rib Group Name —Routing table group for importing OSPF routes.
-
Disable OSPF —Disables OSPF Protocols on this device.
-
Overload Timeout (available only if overload is selected)—Time after which overload mode is
reset (60 - 1800 seconds)
-
Overload —Set the overload mode (repel transit traffic)
-
External Preference —Preference of external routes.
-
Preference —Preference of internal routes.
-
Reference Bandwidth —Bandwidth for calculating metric defaults (9600 - 1000000000000
-
SPF Delay —Time to wait before running an SPF (50 - 1000 milliseconds)
Graceful Restart
- Notify Duration —Time to send all max-aged grace LSAs (1 - 3600 seconds)
-
Restart Duration —Time for all neighbors to become full (1 - 3600 seconds)
-
Disable —Disable OSPF graceful restart capability
-
Helper Disable —Disable graceful restart helper capability
Traffic Engineering
- Shortcuts —Use label-switched paths as next hops, if possible