Owner's Manual

487
•RSVP
•RIP
•PIM
BGP
This tab lets you control the basic BGP settings. It has the following fields:
General Settings
- Description —A Text Description for BGP. Check Disable BGP to reserve these settings without
applying them.
-
Local AS —Local autonomous system number
-
Loops —Maximum number of times this AS can be in an AS path (1 - 10).
-
Local Address —Address of local end of BGP session
-
Peer AS —Peer autonomous system number (1 - 65,535),
-
Authentication Key —MD5 authentication key.
Checkbox Options:
Check any of the following to enable them:
• Enable route flap damping.
• Include Next Hop multi protocol updates.
• Log a message for peer state transitions.
• Allow load sharing among multiple BGP paths.
• Set router ID in aggregator path attribute to 0 (No Aggregator ID).
• Hide this local AS in paths learned from this peering.
• Do not send open messages to a peer.
• Remove well-known private AS numbers.
OSPF
This screen manages OSPF Protocol settings.