Owner's Manual

476
Select Interface to Add / Details / Delete
Click Add / Details to add or edit the interface configuration, or click Delete to delete a selected,
listed interface. Select an interface from the pick list and check
inet, input, output as appropriate
for that interface. Click
Apply to accept your edits and list the interface. Notice that you can use
the up/down arrows to re-order selected interfaces. Interfaces at the top of the list have priority over
those at the bottom.
Click
Apply to accept your edits, or Cancel to abandon them. Clicking Configure sends these items
as configured to the selected equipment.
Refresh re-queries for field values on this screen.
Policy Options -> Prefix Lists
Use this screen to define a list of IPv4 or IPv6 address prefixes for use in a routing policy statement
or firewall filter statement.
Figure 13-45. Policy Options -> Prefix Lists
NOTE:
You must license this service.
Click Export to save a description of the listed items to a file. To remove a prefix list, select it and
click
Delete . Click Add or Edit to create a new, or modify an existing, selected item. When you are
adding or editing, the following fields appear: