Owner's Manual

466
Figure 13-39. DHCP / Bootp Relay Interface
Use the Add or Delete buttons to manage rows in this table of interfaces. Click Export to save a
description of the listed items to a file. Here are the columns you can edit within the rows here:
-
Interface Name —The interface name. (Add / Remove)
-
Listen —A checkbox to set whether this interface is listening.
-
Max Hop Count —The max hop count for the selected interface. Range: 1-16
-
Min Wait Time —The minimum wait time. Range: 0 - 30000 seconds. (If you leave this blank,
the equipment assumes the default remains unchanged.)
-
Server(s) —The IP Address(es) of servers associated with this interface. Click Add after you enter
a server name in the lowest field. You can also select a listed server and click
Delete to remove
it from the list. Click
Apply to confirm your selections.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.