Owner's Manual

465
Figure 13-38. DHCP / Bootp Relay Servers
Use the Add or Remove buttons to manage rows in this table.
-
Max Hop Count —The max hop count for the selected interface. Range: 1-16
-
Min Wait Time —The minimum wait time. Range: 0 - 30000 seconds. (If you leave this blank,
the equipment assumes the default remains unchanged.)
-
Servers— This table lists IP addresses of DHCP / Bootp Relay servers. Enter an address, and click
Add to list one in the table. Select one and click Delete to remove it from the list. Click Apply
to accept your selections.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Forwarding Options -> Bootp Interfaces
This screen manages DHCP / Bootp Relay interface settings.