Owner's Manual

455
- Unit Number —Enter a wild card (* signifies all logical units for this interface), or a logical unit
number.
-
Shaping rate (6.4 & above)—Bandwidth rate for this interface (1000 - 32000000000 bits per
second).
-
Forwarding class —Select a forwarding class assigned to incoming packets from the pick list.
These are defined and created in Class of Service -> Forwarding Classes on page 445.
-
Scheduler Map —Select the scheduler map applied to this logical interface from the pick list. See
Class of Service -> Scheduler Maps on page 449.
Classifiers Tab
This tab configures classifiers applied to incoming packets for the selected interface.
Figure 13-31. Class of Service -> Interfaces -> Classifiers Tab
- Configure the following on this screen by selecting from the pick lists:
-
DSCP —Differentiated Services code point (DSCP) classifier.
-
EXP —EXP classifier.
-
IEEE-802.1 —IEEE-802.1 classifier.
-
Inet-Precedence —IPv4 precedence classifier.
-
DSCP Ipv6 —Differentiated Services code point (DSCP) classifier IPv6 (Junos 6.3 & above).
This panel contains drop-down options defined and created in Class of Service -> Classifiers on
page 451.
Rewrite Rules Tab
This tab configures Rewrite Rules applied to incoming packets for the selected interface.